ISO 9001 (Quality Management Lead Auditor) Part B: ISO 9001 Quality Management Specifics – MCQs
Questions across 10 chapters of ISO 9001 (Quality Management Lead Auditor) Part B: ISO 9001 Quality Management Specifics. Pick a chapter, read sample questions with answers, then take a free test. Available in English.
📚 Chapters
- Quality Management Principles & ISO 9000 Vocabulary MCQ
- Process Approach, Risk-Based Thinking & ISO 9001 Structure MCQ
- Customer Focus & Requirements for Products and Services MCQ
- Operational Planning, Design & Development MCQ
- Control of External Providers (Purchasing & Outsourcing) MCQ
- Production, Service Provision & Changes MCQ
- Release of Products & Control of Nonconforming Outputs MCQ
- Monitoring Resources, Calibration, Organisational Knowledge & Quality Tools MCQ
- Customer Satisfaction, Analysis & Quality Standards Landscape MCQ
- Auditing a QMS: Practical Scenarios MCQ
✅ Practice questions with answers
How many quality management principles (QMPs) are described in ISO 9000?
Quality Management Principles & ISO 9000 Vocabulary
- Seven
- Ten
- Five
- Eight
Show answer
Answer: A — Seven
ISO 9000:2015 describes seven QMPs.
How to solve:ISO 9000 gives 7 QMPs: customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making, relationship management.
ISO 9001 promotes which three concepts together?
Process Approach, Risk-Based Thinking & ISO 9001 Structure
- Lean, Six Sigma and Kaizen
- Agile, Scrum and DevOps
- Budgeting, forecasting and auditing
- The process approach, PDCA and risk-based thinking
Show answer
Answer: D — The process approach, PDCA and risk-based thinking
These concepts are central to ISO 9001.
How to solve:ISO 9001 combines the process approach, PDCA and risk-based thinking. Clause 4.4 lists what must be determined for each process.
ISO 9001 requires communication with customers about:
Customer Focus & Requirements for Products and Services
- only holiday greetings
- only marketing
- product information, enquiries, contracts, orders, feedback, complaints and customer property
- only invoices
Show answer
Answer: C — product information, enquiries, contracts, orders, feedback, complaints and customer property
8.2.1 lists communication topics.
How to solve:Clause 8.2: customer communication, determine requirements (incl. statutory/regulatory), review before committing, and manage changes.
Clause 8.1 of ISO 9001 requires the organisation to plan, implement and control processes by:
Operational Planning, Design & Development
- only writing a manual
- determining requirements, establishing criteria, determining resources, implementing control and keeping documented information
- only hiring staff
- only buying equipment
Show answer
Answer: B — determining requirements, establishing criteria, determining resources, implementing control and keeping documented information
8.1 operational planning.
How to solve:Clause 8.1 plans operations; 8.3 controls design: planning, inputs, controls (reviews, verification, validation), outputs and changes.
ISO 9001 requires criteria for:
Control of External Providers (Purchasing & Outsourcing)
- evaluation, selection, performance monitoring and re-evaluation of external providers
- only supplier location
- nothing
- only lowest price
Show answer
Answer: A — evaluation, selection, performance monitoring and re-evaluation of external providers
8.4.1 criteria.
How to solve:Clause 8.4: criteria for evaluation, selection, performance monitoring and re-evaluation; type and extent of control; clear information to providers.
Controlled conditions for production and service provision include:
Production, Service Provision & Changes
- only expensive equipment
- only good luck
- only experienced staff
- documented information, suitable monitoring resources, infrastructure, competent persons, validation of special processes and actions to prevent human error
Show answer
Answer: D — documented information, suitable monitoring resources, infrastructure, competent persons, validation of special processes and actions to prevent human error
8.5.1 lists controlled conditions.
How to solve:Clause 8.5: controlled conditions, identification & traceability, property of customers/external providers, preservation, post-delivery, control of changes.
ISO 9001 requires that release of products and services to the customer does not proceed until:
Release of Products & Control of Nonconforming Outputs
- payment is received
- the end of the month
- planned arrangements are satisfactorily completed, unless approved by a relevant authority and, where applicable, the customer
- the sales team wants it
Show answer
Answer: C — planned arrangements are satisfactorily completed, unless approved by a relevant authority and, where applicable, the customer
8.6 release.
How to solve:Clause 8.6: verify before release, evidence of conformity and who authorised release. Clause 8.7: identify and control nonconforming outputs (correct, segregate, inform customer, concession).
Measurement traceability requires measuring equipment to be calibrated or verified against:
Monitoring Resources, Calibration, Organisational Knowledge & Quality Tools
- the supplier's catalogue
- measurement standards traceable to international or national standards
- the operator's memory
- a competitor's gauge
Show answer
Answer: B — measurement standards traceable to international or national standards
Traceability links to national/international standards.
How to solve:7.1.5: equipment fit for purpose, calibrated against traceable standards, identified and safeguarded; if found out of calibration, assess validity of previous results. 7.1.6: knowledge.
ISO 9001 9.1.3 requires analysis of data to evaluate:
Customer Satisfaction, Analysis & Quality Standards Landscape
- conformity of products, customer satisfaction, QMS performance, effectiveness of planning and risk actions, external provider performance and need for improvement
- only costs
- only staff attendance
- only sales
Show answer
Answer: A — conformity of products, customer satisfaction, QMS performance, effectiveness of planning and risk actions, external provider performance and need for improvement
9.1.3 lists these.
How to solve:9.1.3 analysis covers conformity, satisfaction, QMS performance, planning effectiveness, risk actions, external provider performance and improvement needs. Know sector QMS standards.
An auditor finds a calibration sticker on a pressure gauge expired three months ago, and the gauge is still in use for final product testing. The MOST relevant requirement is:
Auditing a QMS: Practical Scenarios
- 8.2 customer requirements
- 5.2 quality policy
- 9.3 management review
- 7.1.5 monitoring and measuring resources
Show answer
Answer: D — 7.1.5 monitoring and measuring resources
Measuring equipment used for conformity must be calibrated and its status known.
How to solve:For each scenario ask: which ISO 9001 requirement applies, what objective evidence exists, and is it a nonconformity, an observation or good practice?
💡 How to practise
- Read each rule (UCP 600, ISBP, URDG, ISP98) article by article and practise the matching chapter.
- Case-scenario questions test how rules work together — review every explanation.
- Take a timed exam to get used to answering under pressure.
- Repeat chapters where you score below 75%.